Soft through fabric
The woven shade filters the bulb so the glow feels gentle on a small table, not harsh from above.
The fabric pendant
A cream pleated cone, finished with a gathered striped ruffle and a rounded wood cap. Soft, fabric-diffused light for a breakfast table or a modest dining table — one size, three stripe colours.
Why it works
The woven shade filters the bulb so the glow feels gentle on a small table, not harsh from above.
Fine pleats meet a broader stripe at the hem. A second layer of the same fabric shows under the outer edge.
A rounded wooden cap crowns the shade; a twisted cord runs up to the ceiling.
01 — The shade
The cone holds a fine stripe on cream. The ruffle gathers a broader stripe — and a second layer sits under the hem.
Fine pleats, a cream ground, and a narrow stripe in the chosen colour.
Gathered on, with a broader stripe. A second layer of the same fabric sits under the outer hem.
A rounded wooden cap, with a twisted cord above it. Confirm cord length against your ceiling height before fixing.
02 — Pattern
The silhouette stays the same. Only the colour of the stripe changes.
03 — In the room
British breakfast tables, modest dining, and a pair over a longer run — each pendant sold separately.
04 — Scale
35 cm wide and 30 cm high, including the ruffle. Suits a breakfast table or a modest dining table.
Hang two pendants apart. Each one is sold separately. This is not a two-light fitting.
As a starting point, many homes keep the bottom of the shade about 75–90 cm above the tabletop, then adjust for ceiling height and sightlines. Measure before the cord is fixed.
05 — Before you buy
06 — Care
Fabric shades prefer a light touch. Harsh washing pulls the gather out of shape.
07
The drawing shows one complete shade. The same size applies to all three patterns.
| Product | Amelie fabric pendant light |
|---|---|
| Shade diameter | 35 cm / 13.78 in |
| Shade height | 30 cm / 11.81 in, including the ruffle |
| Pattern | Coffee Stripe, Apricot Stripe or Green Stripe |
| Shade | Woven fabric. Pleated cone and a gathered striped ruffle |
| Cap | Wood |
| Cord | Twisted cord (confirm length against your ceiling before fixing) |
| Number of lights | 1 (pair images show two single pendants) |
| Bulbs included | No |
| Dimming | Depends on the bulb and a compatible wall dimmer |
| Installation | Hardwired ceiling pendant; qualified electrician |
| Location | Indoor, dry only |
Lamp base, exact cord length, canopy size, voltage and maximum wattage are confirmed at fulfilment where marked on the product. A bulb is not supplied. This page does not claim a bathroom or outdoor rating.
FAQ
Coffee reads warmest; Apricot is a softer peach; Green is cooler against cream. The silhouette is identical on all three.
Best for breakfast tables and modest dining. Longer tables or islands usually look better with two pendants, each sold separately.
Start with about 75–90 cm from the tabletop to the bottom of the shade, then adjust for your ceiling and how you use the table.
No. Bulbs are not included.
No machine washing or soaking. Use a soft dry cloth and light spot cleaning only, and avoid pulling the ruffle.
A practical guide to the details that make a room feel considered: the type of light, the right scale, and what to check before you order.
Choose the situation that sounds most like yours. We will point you toward the lighting type that usually works best, then you can browse at your own pace.
With a ceiling point, a pendant can give the main area a clear focal point. Check its drop and spread for your room.
For a softer base layer or a room with limited drop, a ceiling fitting keeps light even without hanging low.
Your wall point can add useful light close to where you need it while keeping the floor and surfaces clear.
With a socket only, a table or desk lamp adds a practical pool of light without rewiring.
A floor lamp uses a socket to add height and a softer layer beside a sofa or reading chair.
The easiest way to narrow a collection is to begin with the job you need the light to do.






A larger statement fitting that brings several light sources together.
Shop chandeliers →Before you fall for a finish, note the width of the surface, the height of the room and how much space people need to move comfortably.
Measure the surface or area the light will sit over.
Check the fitting will not interrupt sightlines or door swings.
Leave enough room for people to walk, sit and reach safely.

A room feels more natural when each light has a clear job. Select a marker to see how a pendant, table lamp and wall light work together.
Select a room for a short, practical checklist and a direct path into the collection.

Start with the table size and the height of the ceiling. A pendant or a small cluster usually gives the most useful focus.

Combine one practical source with table or floor lamps so the room can change with the time of day.

Wall lights and bedside lamps work well when you want a clear surface and a softer glow.

Choose a fitting that is suitable for its position in the room, then decide how you want the light to fall on the mirror.
These are the details that are easy to miss when you are focused on the way a light looks.
Check the product page for the compatible bulb base, maximum wattage and whether the bulb is included.
If you want to dim the fitting, make sure the bulb, dimmer and wiring are compatible with one another.
Confirm the fitting is suitable for your market and whether it is hardwired, plug-in or requires a ceiling point.
Compare the full dimensions with your room, including the canopy, arm movement and the route into the room.
Bathroom and outdoor positions need the right IP rating. Use a qualified electrician for fixed wiring.
Browse by room, compare the practical details, and take your time finding a light that feels right at home.
Before you order
Helpful answers about choosing your light, delivery, installation and returns. Product-specific dimensions and technical details are shown in the product information above.
Start with the full dimensions shown on this product page, then compare them with the available space around your table, kitchen island, mirror, wall or ceiling. Check the fitting's width, depth, height and total drop, and make sure doors, cupboards and walkways remain clear. Our Before You Buy guide explains how to plan the proportion and placement.
Please check the product dimensions, finish, colour, number of lights, bulb base, maximum wattage, voltage and whether bulbs are included. Also check whether the fitting is dimmable, how it is installed and whether your ceiling or wall can support it. If you are unsure about compatibility, please contact us before ordering.
Please use the bulb and included-items information shown for the specific product. Dimming depends on the fitting, bulb and dimmer working together, so please check all three before installation. If the product page does not confirm a feature, contact us for clarification rather than assuming it is included.
Mains-powered lighting should be installed by a qualified electrician. Please check the product information and installation instructions before work begins. For bathroom lighting, the product's IP rating and the intended installation position must both be suitable; a qualified electrician should confirm this.
Estimated times depend on the product, stock location, destination and delivery service selected. Use the table below as a guide.
| Destination and service | Estimated total arrival time | Typical charge |
|---|---|---|
| UK standard delivery | Approximately 3-6 weeks | Usually free |
| UK express delivery | Approximately 4-10 working days | Usually from £9 |
| US warehouse stock | Approximately 4-9 working days | Usually from $10 |
| US factory-direct, standard sea freight | Typically 4-6 weeks, plus any product preparation time | Confirmed at checkout |
| US factory-direct, express air freight | Typically 1-3 weeks, plus any product preparation time | Confirmed before payment |
| European standard delivery | Approximately 3-6 weeks | Usually free |
| European express delivery | Approximately 4-13 working days | Usually from £9 |
| Australia standard delivery | Approximately 3-6 weeks | Usually free |
| Canada and other destinations | Shown at checkout or confirmed by Customer Service | Depends on the order |
Total arrival times include the typical preparation and delivery periods where both are available. Factory-direct preparation can vary by product. These timings are estimates rather than guaranteed delivery dates. Please wait until your order has arrived and been checked before booking an electrician or installer.
Larger orders may be split into several parcels so that individual products can be handled safely. Parcels may have separate tracking numbers and can arrive on different days. Once an order is dispatched, we will email the available tracking details.
Please first check your dispatch email and its tracking link, including your junk or spam folder. If tracking has not updated for an extended period, contact support@ateasehomelife.co.uk with your order number. We can check the latest information with the warehouse or carrier.
Please inspect your order as soon as it arrives. Where possible, contact us within seven days with your order number, clear photos of the product, the outer and inner packaging, and details of anything missing or incorrect. Once confirmed, we will normally arrange replacement parts, a replacement product or the correct item at no extra cost.
For an eligible item, you may request a return within 14 days of receiving it. Please contact us before sending anything back. Once approved, the item must normally be returned within a further 14 days. It must be unused, uninstalled and resaleable, with its original packaging, parts, accessories and instructions.
Made-to-order, bespoke or personalised products may not usually be returned once production has begun. Installed, altered, assembled, used or incomplete items may also be excluded, as may clearance or final-sale products where the product page restricts returns. Bulk orders of three or more of the same item and some overseas warehouse returns may require individual review.
For change-of-mind and other buyer-initiated returns, the customer will normally arrange and pay for return postage. We recommend a tracked service and keeping proof of postage. Express delivery, remote-area supplements and other additional delivery charges are normally non-refundable once dispatched. This does not affect your statutory rights for faulty, damaged or incorrectly described items.
After the approved return reaches the correct warehouse and passes inspection, we will submit the refund to the original payment method within three working days. Your payment provider may then take additional time to show the funds: PayPal usually takes 1-3 working days and card payments usually take 3–7 working days.
Email support@ateasehomelife.co.uk with your order number, the item you wish to return and the reason. Photos of the product and packaging can help us process the request more quickly. Please wait for our instructions and return address; do not send the parcel to an unconfirmed warehouse.