The Melrose wall light
An expressive spring arm and a compact metal shade bring focused light close when it matters, then free up the space beside you.
Explore the details01 / Designed for the everyday
A quietly industrial silhouette that feels at home beside a desk, above a bedside table or within a reading corner.
Move the articulated arm towards your book or workspace. Angle the shade to place light where you want it, while the base stays neatly on the wall.
Expressive mechanicsExposed twin springs are a defining part of the design.
Compact shadeØ13 cm / 5.1 in, easy to aim over a chair, table or bed.
Easy reachA 180 cm / 70.9 in cable includes an inline switch.
02 / Choose a finish
Black makes the sculptural arm a feature. White brings the same character with a softer presence.
03 / A closer look
The steel shade gives the lamp its familiar workshop character; the slim aluminium arm keeps the form light and open. Its visible cable and switch make the practical details part of the composition.
04 / Check the fit
Allow clearance around the arm for adjustment. Check the dimensions against your intended wall position before installation.
A practical guide to the details that make a room feel considered: the type of light, the right scale, and what to check before you order.
Choose the situation that sounds most like yours. We will point you toward the lighting type that usually works best, then you can browse at your own pace.
With a ceiling point, a pendant can give the main area a clear focal point. Check its drop and spread for your room.
For a softer base layer or a room with limited drop, a ceiling fitting keeps light even without hanging low.
Your wall point can add useful light close to where you need it while keeping the floor and surfaces clear.
With a socket only, a table or desk lamp adds a practical pool of light without rewiring.
A floor lamp uses a socket to add height and a softer layer beside a sofa or reading chair.
The easiest way to narrow a collection is to begin with the job you need the light to do.
A larger statement fitting that brings several light sources together.
Shop chandeliers →Before you fall for a finish, note the width of the surface, the height of the room and how much space people need to move comfortably.
Measure the surface or area the light will sit over.
Check the fitting will not interrupt sightlines or door swings.
Leave enough room for people to walk, sit and reach safely.
A room feels more natural when each light has a clear job. Select a marker to see how a pendant, table lamp and wall light work together.
Select a room for a short, practical checklist and a direct path into the collection.
Start with the table size and the height of the ceiling. A pendant or a small cluster usually gives the most useful focus.
Combine one practical source with table or floor lamps so the room can change with the time of day.
Wall lights and bedside lamps work well when you want a clear surface and a softer glow.
Choose a fitting that is suitable for its position in the room, then decide how you want the light to fall on the mirror.
These are the details that are easy to miss when you are focused on the way a light looks.
Check the product page for the compatible bulb base, maximum wattage and whether the bulb is included.
If you want to dim the fitting, make sure the bulb, dimmer and wiring are compatible with one another.
Confirm the fitting is suitable for your market and whether it is hardwired, plug-in or requires a ceiling point.
Compare the full dimensions with your room, including the canopy, arm movement and the route into the room.
Bathroom and outdoor positions need the right IP rating. Use a qualified electrician for fixed wiring.
Browse by room, compare the practical details, and take your time finding a light that feels right at home.
Before you order
Helpful answers about choosing your light, delivery, installation and returns. Product-specific dimensions and technical details are shown in the product information above.
Start with the full dimensions shown on this product page, then compare them with the available space around your table, kitchen island, mirror, wall or ceiling. Check the fitting's width, depth, height and total drop, and make sure doors, cupboards and walkways remain clear. Our Before You Buy guide explains how to plan the proportion and placement.
Please check the product dimensions, finish, colour, number of lights, bulb base, maximum wattage, voltage and whether bulbs are included. Also check whether the fitting is dimmable, how it is installed and whether your ceiling or wall can support it. If you are unsure about compatibility, please contact us before ordering.
Please use the bulb and included-items information shown for the specific product. Dimming depends on the fitting, bulb and dimmer working together, so please check all three before installation. If the product page does not confirm a feature, contact us for clarification rather than assuming it is included.
Mains-powered lighting should be installed by a qualified electrician. Please check the product information and installation instructions before work begins. For bathroom lighting, the product's IP rating and the intended installation position must both be suitable; a qualified electrician should confirm this.
Estimated times depend on the product, stock location, destination and delivery service selected. Use the table below as a guide.
| Destination and service | Estimated total arrival time | Typical charge |
|---|---|---|
| UK standard delivery | Approximately 3-6 weeks | Usually free |
| UK express delivery | Approximately 4-10 working days | Usually from £9 |
| US warehouse stock | Approximately 4-9 working days | Usually from $10 |
| US factory-direct, standard sea freight | Typically 4-6 weeks, plus any product preparation time | Confirmed at checkout |
| US factory-direct, express air freight | Typically 1-3 weeks, plus any product preparation time | Confirmed before payment |
| European standard delivery | Approximately 3-6 weeks | Usually free |
| European express delivery | Approximately 4-13 working days | Usually from £9 |
| Australia standard delivery | Approximately 3-6 weeks | Usually free |
| Canada and other destinations | Shown at checkout or confirmed by Customer Service | Depends on the order |
Total arrival times include the typical preparation and delivery periods where both are available. Factory-direct preparation can vary by product. These timings are estimates rather than guaranteed delivery dates. Please wait until your order has arrived and been checked before booking an electrician or installer.
Larger orders may be split into several parcels so that individual products can be handled safely. Parcels may have separate tracking numbers and can arrive on different days. Once an order is dispatched, we will email the available tracking details.
Please first check your dispatch email and its tracking link, including your junk or spam folder. If tracking has not updated for an extended period, contact support@ateasehomelife.co.uk with your order number. We can check the latest information with the warehouse or carrier.
Please inspect your order as soon as it arrives. Where possible, contact us within seven days with your order number, clear photos of the product, the outer and inner packaging, and details of anything missing or incorrect. Once confirmed, we will normally arrange replacement parts, a replacement product or the correct item at no extra cost.
For an eligible item, you may request a return within 14 days of receiving it. Please contact us before sending anything back. Once approved, the item must normally be returned within a further 14 days. It must be unused, uninstalled and resaleable, with its original packaging, parts, accessories and instructions.
Made-to-order, bespoke or personalised products may not usually be returned once production has begun. Installed, altered, assembled, used or incomplete items may also be excluded, as may clearance or final-sale products where the product page restricts returns. Bulk orders of three or more of the same item and some overseas warehouse returns may require individual review.
For change-of-mind and other buyer-initiated returns, the customer will normally arrange and pay for return postage. We recommend a tracked service and keeping proof of postage. Express delivery, remote-area supplements and other additional delivery charges are normally non-refundable once dispatched. This does not affect your statutory rights for faulty, damaged or incorrectly described items.
After the approved return reaches the correct warehouse and passes inspection, we will submit the refund to the original payment method within three working days. Your payment provider may then take additional time to show the funds: PayPal usually takes 1-3 working days and card payments usually take 3–7 working days.
Email support@ateasehomelife.co.uk with your order number, the item you wish to return and the reason. Photos of the product and packaging can help us process the request more quickly. Please wait for our instructions and return address; do not send the parcel to an unconfirmed warehouse.
